Interrupt Relay: Inspection
WARNING: This page is about a different car, the 2006 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
Measure the interrupt relay resistance between terminals (indicated in the table below) when connecting terminal No. 3 to battery positive terminal and terminal No. 1 to battery ground terminal.
TERMINALS REFERENCE
| Current | Terminal No. | Standard |
|---|---|---|
| Flow | 5 - 2 | 1 MΩ or more |
| 5 - 4 | Less than 1 Ω | |
| No flow | 5 - 2 | Less than 1 Ω |
| 5 - 4 | 1 MΩ or more |
If NG, replace the interrupt relay.