Check Battery Disconnect Protection
WARNING: This page is about a different car, the 2006 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the key from the ignition switch.
- Close all the doors and rear gate.
- Open the front hood.
- Press the keyless transmitter LOCK/ARM button, and wait until the security indicator light blinks twice within 1 second in 1 second cycle.
- Disconnect the ground cable from battery.
- Connect the ground cable to battery.
- Check that the security indicator light blinks twice within 1 second in 1 second cycle after connecting the battery ground cable.
If NG, replace the keyless entry control module.