General Diagnostic Table: Inspection
GENERAL DIAGNOSTIC CHART
| Symptom | Corrective action |
|---|---|
| Starter does not run. | Adjust the select cable and inhibitor switch, or inspect the circuit. |
| Back-up light does not illuminate. | Adjust the select cable and inhibitor switch, or inspect the circuit. |
| AT shift lock system does not operate normally. | Adjust the select cable and inhibitor switch, or inspect the circuit. |
| Gear cannot be shifted into reverse. (6MT) | Adjust the reverse check cable. |
| Gear can be shifted into reverse without pulling up the slider. (6MT) | Adjust or replace the reverse check cable. |
| Slider cannot be pulled up, or the slider is stick in a pulled up position. (6MT) |
|