Keyless Entry Control Module
KEYLESS ENTRY CONTROL MODULE
| Contents | Terminal No. | Measuring condition |
|---|---|---|
| Turn signal light LH | 1 (OUTPUT) | Battery voltage is detected when the transmitter UNLOCK/DISARM button or the LOCK/ARM button is pressed. |
| Power supply (Backup) | 2 | Battery voltage is constantly present. |
| Keyless buzzer | 3 (OUTPUT) | 0 V is detected when the transmitter UNLOCK/DISARM button or the LOCK/ARM button is pressed. |
| Door unlock switch | 4 (INPUT) | 0 V is detected when the door lock switch is operated. |
| Door lock switch | 5 (INPUT) | 0 V is detected when the door lock switch is operated. |
| Door switch and rear gate latch switch | 6 (INPUT) | 0 V is detected when one of the doors or the rear gate is opened. |
| Trunk latch switch | 7 (INPUT) | 0 V is detected when the trunk is opened. |
| Key warning switch | 9 (INPUT) | Battery voltage is present when the key is inserted into the ignition switch. |
| Ignition switch (ON) | 10 (INPUT) | Battery voltage is present when the ignition switch is turned to ON. |
| Turn signal light RH | 13 (OUTPUT) | Battery voltage is detected when the transmitter UNLOCK/DISARM button or the LOCK/ARM button is pressed. |
| Ground | 14 | 0 V is constantly present. |
| Body integrated unit | 18 (OUTPUT) | Battery voltage is detected when pressing the transmitter UNLOCK/DISARM button. |
| Body integrated unit | 19 (OUTPUT) | Battery voltage is detected when pressing the transmitter LOCK/ARM button. |
| Horn relay | 24 (OUTPUT) | When the transmitter LOCK/ARM button is pressed 3 times within 5 seconds, 0 V is detected. |
| Power supply (Backup) | 26 | Battery voltage is constantly present. |