SUBARU Select Monitor (OBD Mode)

On the «Main Menu» display screen, select {Each System Check}.
On the «System Selection Menu» display screen, select {Engine Control System}.
Select the [OK] after the information of engine type has been displayed.
On the «Engine Diagnosis» display screen, select {OBD System}.
On the «OBD Menu» display screen, select {DTC Clear}.
When the «Clear Diagnostic Code?» is shown on the screen, press the [OK].
Turn the ignition switch to OFF and then close the Subaru Select Monitor.

NOTE: For detailed operation procedure, refer to the " SUBARU SELECT MONITOR OPERATION MANUAL ".