FixVault

RH Side

  1. Remove the collector cover.
  2. Release the fuel pressure. <Ref. to RELEASING OF FUEL PRESSURE , PROCEDURE, Fuel .>
  3. Open the fuel filler flap lid, and remove the fuel filler cap.
  4. Disconnect the ground cable from the battery.
    Fig 1: Removing Collector Cover
    G05019586Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the air cleaner case. <Ref. to REMOVAL , Air Cleaner Case .>
  6. Remove the fuel pipe protector RH.
    Fig 2: Locating Fuel Pipe Protector RH
    G05018455Courtesy of SUBARU OF AMERICA, INC.
  7. Disconnect the connector from fuel injector.
    Fig 3: Locating Connector From Fuel Injector
    G05018456Courtesy of SUBARU OF AMERICA, INC.
  8. Remove the engine harness from the fuel injector pipe RH.
  9. Remove the bolt which holds fuel injector pipe onto intake manifold.
    Fig 4: Locating Fuel Injector Pipe RH And Bolts
    G05018411Courtesy of SUBARU OF AMERICA, INC.
  10. Remove the fuel injector while lifting up the fuel injector pipe.