FixVault
Home › Subaru › 2007 › Outback R L.L. Bean Edition, 4D Sedan › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection System (H6DO) › Intake Manifold › Disassembly

Intake Manifold: Disassembly

  1. Remove the engine harness from intake manifold.
  2. Remove the throttle body. <Ref. to REMOVAL , Throttle Body .>
  3. Remove the pressure regulator vacuum hose from the intake manifold.
    Fig 1: Locating Pressure Regulator Vacuum Hose And Intake Manifold
    G05018426Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the manifold absolute pressure sensor. <Ref. to REMOVAL , Manifold Absolute Pressure Sensor .>
  5. Remove the purge control solenoid valve. <Ref. to REMOVAL , Purge Control Solenoid Valve .>
  6. Loosen the clamp which holds fuel injector pipe to the fuel hose, and then disconnect the pipe from fuel hose.
    Fig 2: Locating Fuel Injector Pipe To Fuel Hose And Clamp
    G05018427Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the bolts which install fuel pipes on intake manifold.
    Fig 3: Locating Fuel Pipes, Intake Manifold And Bolts
    G05018428Courtesy of SUBARU OF AMERICA, INC.
    Fig 4: Locating Intake Manifold And Bolts
    G05018429Courtesy of SUBARU OF AMERICA, INC.
About FixVault