FixVault
Home › Subaru › 2007 › Outback XT Limited, Automatic › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection System (H4DOTC) › Knock Sensor › Removal

Knock Sensor: Removal

  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G05019586Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the intercooler. <Ref. to REMOVAL , Intercooler .>
  4. Disconnect the knock sensor connector.
    Fig 2: Identifying Knock Sensor Connector
    G05017743Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the knock sensor from the cylinder block.
    Fig 3: Identifying Knock Sensor
    G04999385Courtesy of SUBARU OF AMERICA, INC.
About FixVault