FixVault
Home › Subaru › 2007 › Outback XT Limited, Automatic › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection System (H4DOTC) › Mass Air Flow and Intake Air Temperature Sensor › Removal

Mass Air Flow and Intake Air Temperature Sensor: Removal

  1. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G05019586Courtesy of SUBARU OF AMERICA, INC.
  2. Disconnect the connector from the mass air flow and intake air temperature sensor.
  3. Remove the mass air flow and intake air temperature sensor.
    Fig 2: Locating Mass Air Flow And Intake Air Temperature Sensor Bolts
    G05017810Courtesy of SUBARU OF AMERICA, INC.
About FixVault