FixVault
Home › Subaru › 2007 › Outback XT Limited, Standard › Repair and Diagnosis › Brakes › Traction Control › Anti-Lock Brake System (Abs) (Diagnostics) › Subaru Select Monitor › Operation › Clear Memory Mode

Clear Memory Mode

  1. On the «Main Menu» screen, select {2. Each System Check}.
  2. On the «System Selection Menu» display screen, select the {Brake Control}.
  3. Select the [OK] after {ABS} is displayed.
  4. On the «Brake Control Diagnosis» display screen, select {Clear Memory}.
    DISPLAY AND CONTENT CHART

    Display Contents to be monitored
    Clear Memory? DTC deleting function
  5. When "Done" and "Turn ignition switch to OFF" are shown on the display screen, turn the ignition switch to OFF and close the Subaru Select Monitor.
    NOTE: For details concerning operation procedures, refer to the "SUBARU SELECT MONITOR OPERATION MANUAL".
About FixVault