Freeze Frame Data
NOTE:
- Data stored at the time of trouble occurrence is shown on the display.
- Each time a trouble occurs, the latest information is stored in the freeze frame data in memory.
- Up to 3 freeze frame data will be stored.
- If freeze frame data is not stored in memory properly (due to a drop in ABS control module power supply etc.), a DTC suffixed with a question mark "-" is displayed on Subaru Select Monitor display screen. This shows it may be an unreliable reading.
DISPLAY AND CONTENT CHART
| Display | Contents to be monitored |
|---|---|
| FR Wheel Speed | Wheel speed detected by front ABS wheel speed sensor RH is displayed in km/h or MPH. |
| FL Wheel Speed | Wheel speed detected by front ABS wheel speed sensor LH is displayed in km/h or MPH. |
| RR Wheel Speed | Wheel speed detected by rear ABS wheel speed sensor RH is displayed in km/h or MPH. |
| RL Wheel Speed | Wheel speed detected by rear ABS wheel speed sensor LH is displayed in km/h or MPH. |
| IG Power Supply Voltage | Voltage supplied (V) to ABSCM&H/U is displayed. |
| G Sensor | Vehicle acceleration detected by analog G sensor is displayed. |
| Motor Relay Monitor | Motor relay condition is displayed. |
| BLS Signal | Brake ON/OFF is displayed. |
| Vehicle Speed | Vehicle speed calculated by ABS control module is displayed. |
| ABS Control Flag | ABS control condition is displayed. |
| Power Supply Failure | Whether abnormal voltage occurred or not is displayed during malfunction. |