FixVault
Home › Subaru › 2007 › Outback i, Automatic › Repair and Diagnosis › Transmission › Transmission Control Systems › A/T Control Systems › AT Steering Shift Switch › Removal

AT Steering Shift Switch: Removal

  1. Disconnect the ground cable from the battery.
  2. Set the tire to the straight-ahead position.
  3. Remove the airbag module. <Ref. to REMOVAL , Driver's Airbag Module .>
    WARNING: If airbag modules are mounted, always refer to "Airbag System" when performing airbag module service. <Ref. to INSPECTION , Driver's Airbag Module .>
  4. Remove the steering wheel. <Ref. to REMOVAL , Steering Wheel .>
  5. Remove the cover from steering wheel.
  6. Remove the AT steering shift switch mounting screws from the left and right side, one on each side.
    Fig 1: Locating AT Steering Shift Switch Mounting Screws
    G05019703Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the steering shift switch.
About FixVault