FixVault
Home › Subaru › 2007 › Outback i, Standard › Repair and Diagnosis › Body & Frame › Door Locks › Security And Locks › Trunk Lid Lock Assembly › Inspection

Trunk Lid Lock Assembly: Inspection

  1. Disconnect the trunk lid actuator harness connector.
  2. Connect the battery to the trunk lid actuator terminals.
    Fig 1: Identifying Trunk Lid Actuator Harness Connector
    G05022816Courtesy of SUBARU OF AMERICA, INC.
    TERMINALS AND ACTUATOR OPERATION REFERENCE

    Terminal No. Actuator operation
    No. 2 (+) and No. 1 (-) Lock → Unlock

    If defective, replace the trunk lid actuator.

  3. Check the striker for deformation or abnormal wear.
  4. Check the safety lever for improper movement.
  5. Check other levers and springs for rust formation or unsmooth movement.
  6. Check the cable of the trunk opener for smooth operation.
About FixVault