FixVault
Home › Subaru › 2007 › Outback i, Standard › Repair and Diagnosis › External Pages › Different variant/trim › Section 15 (Engine Controls (Diagnostics) (H6DO)) › Subaru Select Monitor › Operation › Read Current Data For Engine (OBD Mode)

Read Current Data For Engine (OBD Mode)

WARNING: This page is about a different variant/trim than selected.
  1. On the «Main Menu» display screen, select {Each System Check}.
  2. On the «System Selection Menu» display screen, select {Engine Control System}.
  3. Select the [OK] after the information of engine type has been displayed.
  4. On the «Engine Diagnosis» display screen, select the {OBD System}.
  5. On the «OBD Menu» display screen, select the {Current Data Display/Save}.
  6. On the «Data Display Menu» screen, select {Data Display}.
  7. Using the scroll key, scroll the display screen up or down until the desired data is shown.
    • A list of the support data is shown in the following table.
    SUPPORT DATA CHART

    Contents Display Unit of measure
    Number of diagnosis code Number of Diag. Code: 0
    Condition of malfunction indicator light Ml (MIL) OFF
    Monitoring test of misfire Misfire monitoring Supp YES
    Monitoring test of misfire Misfire monitoring Rdy YES
    Monitoring test of fuel system Fuel system monitoring Supp YES
    Monitoring test of fuel system Fuel system monitoring Rdy YES
    Monitoring test of comprehensive component Component monitoring Supp YES
    Monitoring test of comprehensive component Component monitoring Rdy YES
    Test of catalyst Catalyst Diagnosis Supp YES
    Test of catalyst Catalyst Diagnosis Rdy NO
    Test of heating-type catalyst Heated catalyst Supp NO
    Test of heating-type catalyst Heated catalyst Rdy N/A
    Test of evaporative emission purge control system Evaporative purge system Supp YES
    Test of evaporative emission purge control system Evaporative purge system Rdy NO
    Test of secondary air system Secondary air system Supp NO
    Test of secondary air system Secondary air system Rdy N/A
    Test of air conditioning system refrigerant A/C system refrigerant Supp NO
    Test of air conditioning system refrigerant A/C system refrigerant Rdy N/A
    Test of oxygen sensor Oxygen senor Supp YES
    Test of oxygen sensor Oxygen senor Rdy NO
    Test of oxygen sensor heater Oxygen sensor heater Supp YES
    Test of oxygen sensor heater Oxygen sensor heater Rdy YES
    Test of EGR system EGR system Supp NO
    Test of EGR system EGR system Rdy N/A
    A/F control #1 Fuel system for Bank 1 Normal CLOSE
    A/F control #2 Fuel system for Bank 2 Normal CLOSE
    Load Calculated load value %
    Engine coolant temperature Coolant Temp. °C or °F
    A/F correction value #1 Short term fuel trim B1 %
    A/F learning value #1 Long term fuel trim B1 %
    A/F correction value #2 Short term fuel trim B2 %
    A/F learning value #2 Long term fuel trim B2 %
    Intake manifold absolute pressure Mani. Absolute Pressure mmHg, kPa, inHg or psig
    Engine speed Engine Speed rpm
    Vehicle speed Vehicle speed km/h or MPH
    Ignition timing #1 Ignition timing adv.#1 °
    Intake air temperature Intake Air Temp. °C or °F
    Amount of intake air Mass Air Flow g/s or lb/m
    Throttle opening angle Throttle Opening Angle %
    Oxygen sensor #12 Oxygen sensor #12 V
    A/F correction value #12 Short term fuel trim #12 %
    Oxygen sensor #22 Oxygen sensor #22 V
    A/F correction value #22 Short term fuel trim #22 %
    OBD system OBD System OBD/OBD2
    Oxygen sensor #11 Oxygen sensor #11 Support
    Oxygen sensor #12 Oxygen sensor #12 Support
    Oxygen sensor #21 Oxygen sensor #21 Support
    Oxygen sensor #22 Oxygen sensor #22 Support
    Elapsed time after engine start Time Since Engine Start sec
    Travel distance after the malfunction indicator light illuminates Lighted Ml lamp history km or miles
    A/F sensor #11 A/F sensor #11 -
    A/F sensor #11 A/F sensor #11 V
    A/F sensor #21 A/F sensor #21 -
    A/F sensor #21 A/F sensor #21 V
    Evaporative purge Commanded EVAP Purge %
    Fuel level signal Fuel Level %
    Number of warm ups after DTC clear Number of warm-ups -
    Travel distance after DTC clear Meter since DTC cleared km or miles
    Fuel tank pressure signal Fuel Tank Pressure mmHg, kPa, inHg or psig
    Atmospheric pressure Atmospheric pressure mmHg, kPa, inHg or psig
    A/F sensor #11 A/F sensor #11 -
    A/F sensor #11 A/F sensor #11 mA
    A/F sensor #21 A/F sensor #21 -
    A/F sensor #21 A/F sensor #21 mA
    Catalyst temperature #1 Catalyst Temperature #1 °C or °F
    Catalyst temperature #2 Catalyst Temperature #2 °C or °F
    Monitoring test of misfire Misfire monitoring Enable YES or NO
    Monitoring test of misfire Misfire monitoring Comp YES or NO
    Monitoring test of fuel system Fuel system monitoring Enable YES or NO
    Monitoring test of fuel system Fuel system monitoring Comp YES or NO
    Monitoring test of comprehensive component Component monitoring Enable YES or NO
    Monitoring test of comprehensive component Component monitoring Comp YES or NO
    Test of catalyst Catalyst Diagnosis Enable YES or NO
    Test of catalyst Catalyst Diagnosis Comp YES or NO
    Test of heating-type catalyst Heated catalyst Enable N/A
    Test of heating-type catalyst Heated catalyst Comp N/A
    Test of evaporative emission purge control system Evaporative purge system Enable YES or NO
    Test of evaporative emission purge control system Evaporative purge system Comp YES or NO
    Test of secondary air system Secondary air system Enable N/A
    Test of secondary air system Secondary air system Comp N/A
    Test of air conditioning system refrigerant A/C system refrigerant Enable N/A
    Test of air conditioning system refrigerant A/C system refrigerant Comp N/A
    Test of oxygen sensor Oxygen senor Enable YES or NO
    Test of oxygen sensor Oxygen senor Comp YES or NO
    Test of oxygen sensor heater Oxygen sensor heater Enable YES or NO
    Test of oxygen sensor heater Oxygen sensor heater Comp YES or NO
    Test of EGR system EGR system Enable N/A
    Test of EGR system EGR system Comp N/A
    ECM power voltage Control module voltage V
    Absolute load Absolute Load Value %
    A/F target lambda Target Equivalence Ratio -
    Relative throttle opening angle Relative Throttle Pos. %
    Ambient temperature Ambient Temperature °C or °F
    Absolute throttle opening angle 2 Absolute Throttle Pos.#2 %
    Absolute accelerator opening angle 1 Accelerator Pedal Pos.#1 %
    Absolute accelerator opening angle 2 Accelerator Pedal Pos.#2 %
    Target throttle opening angle Target Throt. Act. Cont. %
    Engine operating time while malfunction indicator light lit Time while MIL lighted min
    Elapsed time after DTC clear Time since DTC cleared min
    Fuel used Type of fuel GAS
    Relative accelerator opening angle Relative Accelera. Pos. %
    NOTE: For detailed operation procedure, refer to the "SUBARU SELECT MONITOR OPERATION MANUAL".
About FixVault