Non-Turbo Model

Attach the radiator under cover to the radiator.

Fig 1: Identifying Radiator Under Cover Bolts
Courtesy of SUBARU OF AMERICA, INC.
Attach the radiator lower cushions to holes on the vehicle.

Fig 2: Identifying Radiator Lower Cushions Holes On Radiator Lower Bracket
Courtesy of SUBARU OF AMERICA, INC.
Install the radiator to vehicle.
NOTE: Make pins on the lower side of radiator be fitted into the radiator lower cushions on body side.
Install the radiator upper brackets and tighten the bolts.
Tightening torque: 18 N.m (1.8 kgf-m, 13.0 ft-lb)

Fig 3: Identifying Radiator Upper Brackets Bolts
Courtesy of SUBARU OF AMERICA, INC.
Attach the power steering hose to the radiator.

Fig 4: Identifying Power Steering Hose Clip On Radiator
Courtesy of SUBARU OF AMERICA, INC.
Connect the radiator inlet hose.

Fig 5: Identifying Radiator Inlet Hose
Courtesy of SUBARU OF AMERICA, INC.
Install the reservoir tank.
Tightening torque: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)

Fig 6: Identifying Reservoir Tank Bolts
Courtesy of SUBARU OF AMERICA, INC.
Connect the over flow hose.
Lift-up the vehicle.
Connect the ATF cooler hoses. (AT model)

Fig 7: Identifying ATF Cooler Hose From ATF Pipe
Courtesy of SUBARU OF AMERICA, INC.
Connect the radiator outlet hose.

Fig 8: Identifying Radiator Outlet Hose And Clip
Courtesy of SUBARU OF AMERICA, INC.
Connect the connectors to the radiator main fan motor (A) and sub fan motor (B).

Fig 9: Identifying Radiator Main Fan Motor Connector And Sub Fan Motor Connector
Courtesy of SUBARU OF AMERICA, INC.
Install the under cover.
Lower the vehicle.
Connect the ground cable to battery.

Fig 10: Disconnecting Battery Ground Cable
Courtesy of SUBARU OF AMERICA, INC.
Fill engine coolant. <Ref. to FILLING OF ENGINE COOLANT , REPLACEMENT, ENGINE COOLANT.>
Check the ATF level. <Ref. to INSPECTION , Automatic Transmission Fluid.>