LH Side

Install in the reverse order of removal.

NOTE: Use new O-rings and insulators.

Fig 1: Identifying Insulator And Fuel Injector (LH Side)

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

6.4 N.m (0.65 kgf-m, 4.7 ft-lb)

Fig 2: Identifying Intake Manifold Bolts

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

19 N.m (1.9 kgf-m, 14.0 ft-lb)

Fig 3: Identifying Fuel Injector Pipe Onto Intake Manifold (LH Side)

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

19 N.m (1.9 kgf-m, 14.0 ft-lb)

Fig 4: Identifying Bolt

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

19 N.m (1.9 kgf-m, 14.0 ft-lb)

Fig 5: Identifying Fuel Pipe Protector

Courtesy of SUBARU OF AMERICA, INC.