RH Side

Install in the reverse order of removal.

NOTE: Use new O-rings and insulators.

Fig 1: Identifying Insulator And Fuel Injector (RH Side)

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

19 N.m (1.9 kgf-m, 14.0 ft-lb)

Fig 2: Locating Bolts (RH Side)

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

19 N.m (1.9 kgf-m, 14.0 ft-lb)

Fig 3: Identifying Injector Pipe Bolt

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

19 N.m (1.9 kgf-m, 14.0 ft-lb)

Fig 4: Identifying Fuel Pipe Protector

Courtesy of SUBARU OF AMERICA, INC.