FixVault
Home › Subaru › 2008 › Forester XT, Automatic › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection System (H4DOTC) › Mass Air Flow and Intake Air Temperature Sensor › Removal

Mass Air Flow and Intake Air Temperature Sensor: Removal

  1. Disconnect the ground cable from the battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G04988132Courtesy of SUBARU OF AMERICA, INC.
  2. Disconnect the connector from the mass air flow and intake air temperature sensor.
  3. Remove the mass air flow and intake air temperature sensor.
    Fig 2: Identifying Mass Air Flow And Intake Air Temperature Sensor
    G04989099Courtesy of SUBARU OF AMERICA, INC.
About FixVault