FixVault
Home › Subaru › 2008 › Forester XT, Automatic › Repair and Diagnosis › Suspension › Wheel Alignment › Front Suspension System › Front Transverse Link › Assembly › Rear Bushing

Rear Bushing

  1. Install the rear bushing to transverse link and align aligning marks scribed on the two.
  2. Tighten a new self-locking nut.
    NOTE: While holding the rear bushing so as not to change position of aligning marks, tighten the self-locking nut.

    Tightening torque: 

    190 N.m (19.4 kgf-m, 140 ft-lb) 

About FixVault