Lateral Link: Installation
Install in the reverse order of removal. Observe the following instructions.
- Installation of DOJ to differential < Ref. to INSTALLATION , Rear Drive Shaft. >
- Always tighten the bushing location when tires are in full contact with the ground and vehicle is curb weight.
- Secure the bolt head and tighten the nut when installing the adjusting bolt.
CAUTION:
- Replace the self-locking nut and DOJ circlip with new ones.
- Always use the special tool not to allow the DOJ splines to damage the side oil seal.
ST 28099PA090 OIL SEAL PROTECTOR
NOTE:
Check the wheel alignment and adjust if necessary.