Rear Strut: Installation
- Secure the strut mount to body with a new self-locking nut.
Tightening torque:
20 N.m (2.0 kgf-m, 14.5 ft-lb)
- Secure the rear strut to housing with a new self-locking nut.
Tightening torque:
200 N.m (20.4 kgf-m, 148 ft-lb)
- Install the brake hose to lower side of strut, then insert brake hose clip.
- Lower the vehicle and tighten wheel nut.
Tightening torque:
90 N.m (9.2 kgf-m, 66 ft-lb)
- Install the strut cap to rear quarter trim.
- Check the wheel alignment and adjust if necessary.