FixVault
Home › Subaru › 2008 › Forester XT, Standard › Repair and Diagnosis › Brakes › Traction Control › Abs - Vehicle Dynamics Control (VDC) System (Diagnostics) › Subaru Select Monitor › Operation › Clear Memory Mode

Clear Memory Mode

  1. On the « Main Menu » display screen, select {Each System Check}.
  2. On the « System Selection Menu » display screen, select {Brake Control}.
  3. Click the [OK] button after the {VDC} is displayed.
  4. On the « Brake Control Diagnosis » display screen, select {Clear Memory}.
  5. When the "Clear Memory?" is shown on the screen, click the [YES] button.
  6. When "Done" and "Turn ignition switch to OFF" are shown on the display screen, turn the ignition switch to OFF.
NOTE: For details concerning the operation procedure, refer to the "help on PC application for Subaru Select Monitor".
About FixVault