Freeze Frame Data
NOTE:
- Data stored at the time of failure occurred is shown on display.
- Each time a failure occurs, the latest information is stored in the freeze frame data in memory.
- 1 freeze frame data is stored.
- If a freeze frame data is not properly stored in memory (due to a drop in VDCCM power supply, etc.), a DTC suffixed with a question mark "?" appears on the Subaru Select Monitor display. This shows it may be an unreliable reading.
FREEZE FRAME DATA LIST
DATA LIST OF FREEZE FRAME
| Display | Contents to be monitored |
|---|---|
| FR Wheel Speed | Wheel speed detected by the front ABS wheel speed sensor RH is displayed in km/h. |
| FL Wheel Speed | Wheel speed detected by the front ABS wheel speed sensor LH is displayed in km/h. |
| RR Wheel Speed | Wheel speed detected by the rear ABS wheel speed sensor RH is displayed in km/h. |
| RL Wheel Speed | Wheel speed detected by the rear ABS wheel speed sensor LH is displayed in km/h. |
| Steering Angle Sensor | Steering wheel angle detected by steering angle sensor is displayed. |
| Yaw Rate Sensor | Vehicle angular speed detected by the yaw rate sensor is converted and displayed in volts. |
| Lateral G Sensor | Vehicle lateral direction acceleration detected by lateral G sensor is converted and displayed in volts. |
| Primary Pressure Sensor | Brake fluid pressure detected by the primary pressure sensor is converted and displayed in volts. |
| Secondary Pressure Sensor | Brake fluid pressure detected by the secondary pressure sensor is converted and displayed in volts. |
| Vehicle Speed | The vehicle speed is displayed. |
| Required Torque | Engine torque required by the driver is displayed. |
| Current Torque | Current engine torque is displayed. |
| Target Torque | The target torque is displayed. |
| Acceleration Opening Angle | Acceleration opening is displayed. |
| Engine Speed | Engine speed is displayed. |
| Gear Position | Gear position is displayed. |
| IG Power Supply Voltage | Voltage supplied to VDC control module is displayed. |
| ABS Warning Light | ON/OFF condition of the ABS warning light is displayed. |
| EBD Warning Light | ON/OFF condition of the EBD warning light is displayed. |
| VDC Warning Light | ON/OFF condition of the VDC warning light/VDC OFF indicator light is displayed. (ON is displayed when there is a VDC failure.) |
| VDC OFF Light | ON/OFF condition of the VDC warning light/VDC OFF indicator light is displayed. (ON/OFF is displayed by operating the VDC OFF switch and EAM signal.) |
| VDC Operation Light | ON/OFF condition of VDC indicator light is displayed. |
| Valve Relay Signal | The valve relay operating condition is displayed. |
| Motor Relay Driving Vibration | The motor relay operating condition is displayed. |
| Motor Relay Monitor | The motor relay operating condition is displayed. |
| Decreasing Required Torque | Engine torque decrease request is displayed. |
| EAM Signal | Engine control command signal is displayed. |
| VDC O Control Flag | VDC operation condition (over-steering) is displayed. |
| VDC U Control Flag | VDC operation condition (under-steering) is displayed. |
| ABS Control Flag | ABS operating condition is displayed. |
| VDC OK B Signal | VDC sensor normal flag |