VDC Hydraulic Control Module (VDCH/M): Installation: VDCH/M

Install the VDCH/M.

Fig 1: Locating VDCH/M Bolts

Tightening torque:

18 N.m (1.8 kgf-m, 13.3 ft-lb)
Secure the grounding wire of the VDCH/M and apply the specified grease to the ground terminals.
Specified grease:

Nippeco LT or GB

Tightening torque:

33 N.m (3.4 kgf-m, 24.3 ft-lb)
Connect brake pipes to the VDCH/M connectors.
Tightening torque:

15 N.m (1.5 kgf-m, 11.1 ft-lb)
Fasten the VDCH/M connector to the connector bracket.
CAUTION: Match the connector to the corresponding socket.
Connect the connector to VDCH/M.

Fig 2: Identifying VDCH/M Connector And Relay Box Connector
Install the air intake duct.
Connect the battery ground cable to the battery.
Bleed air from the brake system.