FixVault
Home › Subaru › 2008 › Forester XT, Standard › Repair and Diagnosis › Brakes › Traction Control › Abs - Vehicle Dynamics Control (VDC) System › VDC Hydraulic Control Module (VDCH/M) › Removal › Relay Box

Relay Box

  1. Disconnect the ground cable from the battery.
  2. Remove the air intake duct from engine room to make it easier to remove the relay box.
  3. Disconnect the connector from relay box.
  4. Remove the cable clip.
  5. Remove the bolts which secure the relay box, and remove the relay box and connector bracket.
    Fig 1: Locating Relay Box Bolts
    G04994860
    CAUTION: Do not drop or bump the relay box.
About FixVault