FixVault
Home › Subaru › 2008 › Impreza Outback Sport, Automatic › Repair and Diagnosis › Engine Performance › Engine Control Systems › Speed Control Systems (H4SO) › Accelerator Pedal › Removal

Accelerator Pedal: Removal

  1. Disconnect the ground cable from battery.
    2. Fig 1: Identifying Ground Cable To Battery
    G05019586Courtesy of SUBARU OF AMERICA, INC.
  2. Disconnect the connector (A).
  3. Remove the nut (B) securing accelerator pedal assembly.
Fig 2: Identifying Accelerator Pedal Assembly, Connector And Nuts
G05339682Courtesy of SUBARU OF AMERICA, INC.
About FixVault