Fuel Pump Control (On/Off Operation)

CAUTION: After executing the operation check mode, execute the Clear Memory Mode. < Refer to OPERATION , Clear Memory Mode. >

On the «System operation check mode» display, select the {Fuel Pump Control}.
On the «Fuel Pump Control» display screen, select the {ON/OFF Operation}.
On the «Turn Ignition Switch ON with Engine Stalled» display screen, turn the ignition switch to ON and click the [OK] button.
Click the [Cancel] button to end the ON/OFF drive. The screen will return to the «Fuel Pump Control» screen.
NOTE: For detailed operation procedure, refer to the "PC application help for Subaru Select Monitor".