FixVault
Home › Subaru › 2008 › Outback Base, Automatic › Repair and Diagnosis › Electrical › Horns › Horn System › Horn › Removal

Horn System: Horn: Removal

  1. Disconnect the ground cable from battery.
  2. Remove the two clips and peel the right side lower mud guard upward.
    Fig 1: Locating Horn Clips
    G05022586
  3. Remove the horn bracket mounting bolt (A).
  4. Disconnect the harness connector and remove the horn assembly (B).
    Fig 2: Identifying Horn Bracket Mounting Bolt
    G05022587
About FixVault