FixVault
Home › Subaru › 2008 › Outback Base, Automatic › Repair and Diagnosis › External Pages › Different car › Section 117 (Lighting System) › Rear Combination Light Assembly › Removal › Sedan Model

Sedan Model

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove the trunk room side trim. <Ref. to REMOVAL , Trunk Room Trim .>
  3. Remove the four nuts, and then detach the rear combination light after disconnecting the connector.
    Fig 1: Locating Rear Combination Light Nuts
    G05022482Courtesy of SUBARU OF AMERICA, INC.
About FixVault