FixVault
Home › Subaru › 2008 › Outback Base, Automatic › Repair and Diagnosis › External Pages › Different car › Section 142 (Security And Locks) › Impact Sensor › Adjustment › Impact Sensitivity Adjustment

Impact Sensitivity Adjustment

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the Subaru Select Monitor to the data link connector.
  2. Turn the ignition switch to ON.
  3. Select {Impact Sensor} from the main menu.
  4. Make a {Sensitivity Adjustment Mode}
    • Sensitivity can be adjusted in 11 levels (0 to 10).
    • Initial setting is 5.
    • Smaller number means more sensitive.
    • Larger number means less sensitive.
  5. Turn the ignition switch to OFF, and then remove the Subaru Select Monitor.
    NOTE:
    • Set the sensor so as not to let the alarm on normal vibration (reclining to the door, hit the ball and etc.).
    • Set the sensor to operate the alarm with hitting the door or window glass, etc. continuously like a mayhem by robbery.
    • Ask the customer about parking situation for setting, because the alarm operate when the vibration not only the burglar but also the construction etc.
About FixVault