Section 151 (Engine Intake System - Intake (Induction) (H4DOTC)): Intercooler: Installation

WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

NOTE:

Use new O-rings.
Be careful not to pinch the O-ring.

Tightening torque: 16 N.m (1.6 kgf-m, 11.8 ft-lb)

Fig 1: Identifying Brake Booster Vacuum Hose Clip And Bolts

Courtesy of SUBARU OF AMERICA, INC.

Fig 2: Locating Intercooler To Turbocharger Bolts

Courtesy of SUBARU OF AMERICA, INC.

Fig 3: Locating Intercooler To Intercooler Stay Bolt

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque: 3 N.m (0.3 kgf-m, 2.2 ft-lb)

Fig 4: Locating Intake Duct Clamp

Courtesy of SUBARU OF AMERICA, INC.