Section 169 (Clutch System): Flywheel: Installation

WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

Install the flywheel and ST.
ST 498497100 CRANKSHAFT STOPPER

Fig 1: Identifying ST 498497100 Crankshaft Stopper
Courtesy of SUBARU OF AMERICA, INC.
Tighten the flywheel mounting bolts to the specified torque.
NOTE: Tighten the flywheel attachment bolts gradually. Each bolt should be tightened to the specified torque in crisscross order.

Tightening torque:

72 N.m (7.3 kgf-m, 53.1 ft-lb)

Fig 2: Identifying Tightening Sequence Of Flywheel Mounting Bolts
Courtesy of SUBARU OF AMERICA, INC.
Install the clutch disc and cover. <Ref. to INSTALLATION , Clutch Disc and Cover . >
Install the transmission assembly.

<Ref. to INSTALLATION , Manual Transmission Assembly . >