Operating Cylinder: Removal

WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The illustration below is suitable for every model. Perform the same procedures for the other models.

Remove the air intake chamber. (Non-turbo model) <Ref. to REMOVAL , Air Intake Chamber . >
Remove the intercooler. (Turbo model)
<Ref. to REMOVAL , Intercooler . >
Disconnect the clutch hose from the operating cylinder.
CAUTION:
- Cover the hose joint to prevent the clutch fluid from flowing out.
- Do not loosen or remove the cap bolt. (Turbo model)
Fig 1: Identifying Clutch Hose And Operating Cylinder
Courtesy of SUBARU OF AMERICA, INC.
Remove the operating cylinder from the transmission.

Fig 2: Identifying Operating Cylinder

Courtesy of SUBARU OF AMERICA, INC.