Front Crossmember Support Plate: Installation

WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

NOTE: Tighten the small type crossmember support plate together with stabilizer bracket. After installing the stabilizer bracket to the cross-member, tighten the crossmember support plate together.

Tightening torque:

Crossmember support plate:

60 N.m (6.1 kgf-m, 44.3 ft-lb)

Crossmember support plate (Tightened together with the stabilizer bracket):

25 N.m (2.5 kgf-m, 18.4 ft-lb)

Jack-up plate:

60 N.m (6.1 kgf-m, 44.3 ft-lb)