FixVault
Home › Subaru › 2008 › Outback Base, Automatic › Repair and Diagnosis › External Pages › Different car › Section 192 (Lighting System) › Door Switch › Removal

Door Switch: Removal

WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from the battery.
  2. Remove the screw, and pull out the door switch.
    Fig 1: Locating Door Switch Screw
    G05663507Courtesy of SUBARU OF AMERICA, INC.
  3. Disconnect the harness connector.
About FixVault