Power Window Control Switch: Removal: Sub-Switch

WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

Open the screw cover by using a flat tip screwdriver.
Remove the screw to remove the power window main switch panel.

Fig 1: Identifying Power Window Main Switch Panel
Courtesy of SUBARU OF AMERICA, INC.

NOTE: Remove it from the cutout portion at the tip of the switch panel.

Fig 2: Identifying Cutout Portion
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector.
Remove the screw to remove the power window main switch assembly.