FixVault
Home › Subaru › 2008 › Outback Base, Automatic › Repair and Diagnosis › External Pages › Different car › Section 56 (Lighting System) › Front Fog Light Assembly › Removal › Except For Outback Model

Except For Outback Model

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove the front fog light cover (A).
    Fig 1: Identifying Front Fog Light Cover
    G05022471
  3. Disengage the two clips, and then turn over the lower mud guard.
    Fig 2: Locating Lower Mud Guard Clips
    G05022586
  4. Disconnect the harness connector.
  5. Remove the mounting bolts, then detach the fog light assembly by pulling it out.
    Fig 3: Locating Fog Light Assembly Mounting Bolts
    G05022473
About FixVault