RH Side

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

NOTE: Use new O-rings.

Fig 1: Identifying O-Ring And Fuel Injector (RH Side)

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque: 19 N.m (1.9 kgf-m, 14.0 ft-lb)

Fig 2: Locating Intake Manifold Bolts (RH)

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque: 19 N.m (1.9 kgf-m, 14.0 ft-lb)

Fig 3: Identifying Fuel Pipe Protector RH With Bolts

Courtesy of SUBARU OF AMERICA, INC.