5MT Turbo Model

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Install the flywheel and ST.
ST 498497100 CRANKSHAFT STOPPER

Fig 1: Installing Flywheel And ST
Courtesy of SUBARU OF AMERICA, INC.
Tighten the flywheel mounting bolts to the specified torque.
ST 499057000 TORX® PLUS

CAUTION: The bolts without identification groove as shown in the figure must be used as flywheel attaching bolts for 5MT turbo model.

Fig 2: Identifying Bolt With/Without Identification Groove
Courtesy of SUBARU OF AMERICA, INC.

NOTE: Tighten the flywheel attachment bolts gradually. Each bolt should be tightened to the specified torque in crisscross order.

Tightening torque:

72 N.m (7.3 kgf-m, 52.8 ft-lb)

Fig 3: Identifying Tightening Sequence Of Flywheel Bolts
Courtesy of SUBARU OF AMERICA, INC.
Install the clutch disc and cover. <Ref. to INSTALLATION , Clutch Disc and Cover .>
Install the transmission assembly. <Ref. to INSTALLATION , Manual Transmission Assembly .>