5MT Model

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Apply the specified grease to lubricate the following points before installation.

Contact surface of lever and pivot
Contact surface of lever and bearing
Transmission main shaft spline (Use grease containing molybdenum disulphide.)

While pushing the release lever to the pivot and twisting it to both sides, fit the lever spring onto the raised portion of the pivot.
NOTE:
- Apply grease (KOPR-KOTE: Part No. 003603001) to the contact point of the release lever and operating cylinder.
- Observing from the main case hole, check that the lever spring is installed securely.
  
  Fig 1: Identifying Release Lever
  Courtesy of SUBARU OF AMERICA, INC.
Install the release bearing and fasten it with two clips. (Non-turbo model)
Install the release bearing. (Turbo model)
Install the dust cover.

Fig 2: Identifying Dust Cover And Release Lever
Courtesy of SUBARU OF AMERICA, INC.
Check the bearing for smooth movement by operating the release lever.
Install the transmission assembly.
<Ref. to INSTALLATION , Manual Transmission Assembly .>