Section 92 (Starting System & Charging System (H4SO)): Generator: Removal

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from the battery.

Fig 1: Disconnecting Ground Cable
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector and terminal from generator.
- 2.5 L Non-turbo model
  
  Fig 2: Identifying Generator Connector - Non-Turbo Model
  Courtesy of SUBARU OF AMERICA, INC.
- 3.0 L Non-turbo model
  
  Fig 3: Identifying Generator Connector - 3.0 L Non-Turbo Model
  Courtesy of SUBARU OF AMERICA, INC.
- Turbo model
  
  Fig 4: Identifying Generator Connector - Turbo Model
  Courtesy of SUBARU OF AMERICA, INC.
Remove the V-belt covers.
Remove the V-belts.
<Ref. to FRONT SIDE BELT , REMOVAL, V-belt .> or <Ref. to FRONT SIDE BELT , REMOVAL, V-belt .> <Ref. to REMOVAL , V-belt .>
Remove the bolts which install the generator onto bracket.

Fig 5: Locating Generator Bolts
Courtesy of SUBARU OF AMERICA, INC.