Master Cylinder: Disassembly

WARNING: This page is about a different variant/trim than selected.

Remove the straight pin and reservoir tank.

Fig 1: Identifying Straight Pin And Reservoir Tank
Courtesy of SUBARU OF AMERICA, INC.
Remove the oil seal.

Fig 2: Identifying Oil Seal
Courtesy of SUBARU OF AMERICA, INC.
Move the seat towards the rear.

Fig 3: Moving Seat Towards Rear
Courtesy of SUBARU OF AMERICA, INC.
Remove the snap ring.
CAUTION: Be careful when removing the snap ring, to prevent the rod, washer, piston and return spring from flying out.
Remove the clutch damper.