FixVault
Home › Subaru › 2008 › Outback Base, Automatic › Repair and Diagnosis › External Pages › Different variant/trim › Section 4 (Fuel Injection System (H4DOTC)) › Oil Flow Control Solenoid Valve › Disassembly

Oil Flow Control Solenoid Valve: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove the 2 mounting bolts and remove the oil return cover and gasket.
  2. Remove the mounting bolt and remove the oil flow control solenoid valve.
    Fig 1: Identifying Oil Flow Control Solenoid Valve, Oil Return Cover And Camshaft Cap
    G05340180Courtesy of SUBARU OF AMERICA, INC.
About FixVault