FixVault

Intake Duct: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the collector cover.
  2. Disconnect the ground cable from the battery.
    Fig 1: Disconnecting Ground Cable And Battery
    G05019586Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the intake manifold. <Ref. to REMOVAL , Intake Manifold .>
  4. Remove the sensor, engine harness and fuel pipe attached to the intake manifold. <Ref. to DISASSEMBLY , Intake Manifold .>
  5. Remove the intake duct from intake manifold.
    Fig 2: Identifying Intake Duct And Intake Manifold
    G05340349Courtesy of SUBARU OF AMERICA, INC.