FixVault
Home › Subaru › 2008 › Outback Base, Automatic › Repair and Diagnosis › External Pages › Different variant/trim › Section 7 (Engine Intake System - Intake (Induction) (H4DOTC)) › Intercooler › Assembly

Section 7 (Engine Intake System - Intake (Induction) (H4DOTC)): Intercooler: Assembly

WARNING: This page is about a different variant/trim than selected.

Assemble in the reverse order of disassembly.

NOTE:
  • Use new O-rings.
  • Be careful not to pinch the O-ring.

    Tightening torque: 

    6.5 N.m (0.66 kgf-m, 4.8 ft-lb) 

    Fig 1: Locating Intercooler
    G05017984Courtesy of SUBARU OF AMERICA, INC.
About FixVault