FixVault
Home › Subaru › 2008 › Outback Base, Automatic › Repair and Diagnosis › Restraints › Air Bag, SRS › Airbag System › Airbag Connector › Procedure › Airbag Control Module

Airbag Control Module

  1. How to disconnect:

    Press the lock lever plate (A) and pull out the lock lever.

    Fig 1: Pulling Out Lock Lever
    G05663341Courtesy of SUBARU OF AMERICA, INC.
  2. How to connect:

    Insert the connector, push the lock lever in securely.

    CAUTION: Be sure to insert the connector in until it is locked. Then pull it lightly to make sure that it is locked.
About FixVault