Front Crossmember Support Plate: Installation

Install in the reverse order of removal.

NOTE: Tighten the small type crossmember support plate together with stabilizer bracket. After installing the stabilizer bracket to the cross-member, tighten the crossmember support plate together.

Tightening torque:

Crossmember support plate:

60 N.m (6.1 kgf-m, 44.3 ft-lb)

Crossmember support plate (Tightened together with the stabilizer bracket):

25 N.m (2.5 kgf-m, 18.1 ft-lb)

Jack-up plate:

60 N.m (6.1 kgf-m, 44.3 ft-lb)