FixVault
Home › Subaru › 2008 › Outback Base, Automatic › Repair and Diagnosis › Suspension › Wheel Alignment › Rear Suspension System › Rear Arm › Disassembly › Front Bushing

Front Bushing

  1. Set the ST A with the larger side of its inner diameter turned upward.
  2. Set the rear arm with the protruding side of bushing turned upward.
  3. Place the ST B on bushing, and push the bushing out.

    ST A 20099AE020 INSTALLER & REMOVER SET

    ST B 20099AE020 INSTALLER & REMOVER SET

    Fig 1: Pressing Front Bushing Using Installer & Remover Set ST 927720000
    G05342893Courtesy of SUBARU OF AMERICA, INC.
About FixVault