FixVault
Home › Subaru › 2008 › Outback Base, Automatic › Repair and Diagnosis › Suspension › Wheel Alignment › Rear Suspension System › Rear Stabilizer › Removal

Rear Stabilizer: Removal

  1. Lift up the vehicle, and then remove the rear wheels.
  2. Remove the stabilizer link.
    Fig 1: Locating Stabilizer Link Bolt
    G05342877Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the stabilizer bracket.
    Fig 2: Locating Stabilizer Bracket Bolts
    G05342878Courtesy of SUBARU OF AMERICA, INC.
About FixVault