FixVault
Home › Subaru › 2008 › Outback Base, Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission (4AT) › Reduction Drive Gear › Assembly

Reduction Drive Gear: Assembly

  1. Press-fit the reduction drive gear to shaft.
  2. Press-fit the new ball bearing into reduction drive gear.
  3. Apply vaseline onto the seal ring outer surface and shaft grooves.
  4. Apply ATF to new seal rings and install them.
    Fig 1: Identifying Reduction Drive Shaft And Seal Ring
    G05668412Courtesy of SUBARU OF AMERICA, INC.
About FixVault